$20.00
We will hold your cart for 15:00.
The DEWALT DXCMLA1682066 is a 1.6 HP, 20-gallon single-stage oil-lube vertical portable air compressor with a cast-iron V-twin pump, 155 PSI max pressure, and dual-voltage motor.
Pair withDEWALT DXCMLA1983012 30-Gallon Air Compressor – 155 PSI$98.14
Categories : tools
SKU : WOR-TOO-1191
The DEWALT DXCMLA1682066 1.6 HP 20-gallon single-stage oil-lube vertical portable air compressor is a jobsite-ready compressor for professionals who need portability and dependable air. The cast-iron V-twin oil-lubricated pump runs cooler and more quietly than many direct-drive models, while the 20-gallon tank provides enough reserve for brad nailers, air staplers, blow guns, and small impact tools.
The compressor features automotive-style ball bearings, stainless steel reed valves, and a cast-iron balanced flywheel for durability and easy maintenance. The integrated control panel includes a quick-set regulator, tank and tool pressure gauges, a quick-connect outlet, and an on/off switch.
For best performance, use a non-detergent SAE 30 compressor oil or a synthetic compressor oil. The exact oil capacity and change schedule are listed in the DXCMLA1682066 owner’s manual. The oil level sight glass and easy-access oil fill make routine checks fast.
The vertical tank with pneumatic tires and a comfortable handle lets you roll this compressor to the job. It’s stable enough for stationary work yet easy to move between rooms or job sites.
It’s wired for a standard 120V household outlet and can be converted to 240V when you need more flexibility. Use the instructions in the manual for proper voltage configuration.
Remodelers, framers, finish carpenters, and contractors who want a compact, oil-lubed compressor with enough air for a crew on the move will appreciate this model’s balance of portability and build quality.
Cast-iron V-twin oil-lubricated pump: Runs cooler and lasts longer than oil-free designs.
155 PSI max pressure: Provides power for a wide range of air tools.
20-gallon vertical tank with pneumatic tires: Portable enough to move around the jobsite.
Dual-voltage motor: Works on standard 120V outlets and can be converted to 240V.
Integrated control panel: Quick-set regulator, gauges, quick-connect outlet, and on/off switch.
Pump: Cast-iron V-twin, oil-lubricated
Model: DXCMLA1682066
Motor: Heavy-duty induction, dual-voltage 120V/240V
Stage: Single
Included: Quick-set regulator, gauges, quick connect outlet, on/off switch
Horsepower: 1.6 HP
Portability: Pneumatic tires
Max Pressure: 155 PSI
Product Type: Air Compressor
Tank Capacity: 20 Gallons
Seller: Workbench World
MPN: DXCMLA1682066
Oil-lubricated pumps run cooler and usually last longer than oil-free designs. The V-twin configuration and cast-iron construction are typical of professional-grade compressors.
Check the air tool's CFM requirement at the operating pressure. This 20-gallon model handles most brad nailers and small tools, while larger continuous-use tools may need a bigger tank.
Drain the tank after every use, check the oil sight glass daily, and follow the oil change intervals in the manual. Keep the exterior clean to prevent debris from entering the pump.
Use a non-detergent SAE 30 compressor oil or a synthetic compressor oil recommended by DEWALT. Do not use automotive motor oil with detergents.
The exact oil capacity is listed in the product manual. Fill through the top oil fill until the sight glass reads on the proper level; avoid overfilling.
Yes, it is wired for 120V standard outlet and can be converted to 240V for alternate use. Check the manual for amperage requirements.
For first-time use, many manufacturers recommend changing oil after the first break-in period (usually 50 hours), then every 200 hours or at least annually. Follow the manual.
Yes, the 20-gallon vertical tank is mounted on pneumatic tires and has a handle for easy movement around the jobsite.
Good compressor.
Works well for my home garage. The wheels make it easy to move. Happy with it.
As a hobbyist woodworker, I needed a compressor that could run my brad nailer and occasionally spray paint. This DEWALT 20 gallon does the job. The oil-lube pump is quieter than the oil-free ones I've had. It builds pressure quickly. The dual voltage is handy for different outlets. The drain valve is easy to access. My only peeve is the noise, but it's not terrible. Overall, great value for the money.
I run a roofing crew and this compressor is our backup. It starts every time. The tank is plenty big. It's held up well.
Powers my tools fine. It's a little loud but okay. The oil fill is a bit messy.
I use this to blow out irrigation lines. It works well. The wheels are nice. It's a bit heavy to lift into the truck, but manageable.
This compressor is a workhorse. I've used it for framing and it hasn't missed a beat. The cast iron pump is built to last.
It works, but the regulator is not super accurate. And it seems to run longer to fill than my old one. Maybe it's the cold? Not a deal breaker.
Picked this up for my garage. Perfect size for weekends. Very solid.
Bought this for my husband. He uses it every day for his workshop. He says it's reliable and powerful. I'm glad we chose this.
Orders over $45.00 ship free. Otherwise, shipping is $8.00.
Hassle-free returns
SSL encrypted checkout
100% genuine products
Power tools for every job – shop DeWalt and Ridgid with clear specs and free shipping over $45.
Phone: +1 (216) 555-0174
Email: support@workbenchworld.us
Address: 4820 Industrial Parkway, Cleveland, OH 44135, United States