$20.00
We will hold your cart for 15:00.
The DeWalt DXH2000TS is a thermostatically controlled 20kW/13kW electric forced air heater that delivers powerful, fume-free warmth for large indoor workshops and job sites.
Pair withDEWALT DXH2003TS 20kW 240V Forced Air Electric Heater$99.99
Categories : tools
SKU : WOR-TOO-1299
The DeWalt DXH2000TS Electric Forced Air Heater is built for professionals who need reliable, high-output heat in large indoor spaces. With a 20 kW high setting and a 13 kW low setting, this single-phase 240V unit lets you choose the power level for the job—no refueling, no open flame, and no carbon monoxide worries.
This forced air heater cycles between the 20 kW and 13 kW outputs automatically to hold your target temperature. The two-stage operation runs at lower power when the space is warm, saving energy and reducing temperature swings.
Because the DXH2000TS runs on electricity, it produces clean, dry heat with no exhaust gases or fuel storage. That makes it a safe choice for indoor use on construction sites, in warehouses, or in workshop areas where ventilation is limited.
This 20 kW model is one of the most powerful portable electric heaters in its class. It’s ideal for quickly heating an entire 2,500+ square foot workspace. If you typically work in a smaller area, a lower-output unit might save on electrical load, but the DXH2000TS gives you the flexibility to start fast and maintain efficiently.
20 kW / 13 kW dual-stage output: matches heat to the job and saves energy
Thermostatic control: automatically cycles between power levels to hold a steady temperature
240V single-phase power: clean electric heat with no fuel smell or carbon monoxide risk
ETL certified and thermally protected: built for safe indoor use
Electric operation: no refueling, no monitoring, just consistent heat
Model: DXH2000TS
Voltage: 240V AC, single phase
Amperage: 100A high / 60A low
Max Power: 20 kW high / 13 kW low
Product Type: Electric Forced Air Heater
Certification: ETL Certified
Heating Capacity: 68,240 BTU/hr
Temperature Control: Thermostatic two-stage
Seller: Workbench World
MPN: DXH2000TS
The DXH2000TS pushes a high volume of forced air, which moves heat through a large area more quickly than radiant heaters. The dual power settings let you start with maximum output and then let the thermostat hold the temperature at a lower draw.
DeWalt’s proprietary dual coil support system keeps the heating elements stable even after long run times. Combined with thermal protection, this design is engineered for daily professional use.
No open flame and no carbon monoxide means you can leave the heater running while you’re in the space—keeping your tools and materials warm and your work moving. Set the thermostat, close the door, and get to the job.
It delivers up to 68,240 BTU/hr, so it’s suited for large workshops, warehouses, and construction spaces—roughly 2,000 to 3,000 square feet depending on insulation and ceiling height.
The heater can run at 20 kW on a 240V circuit rated for 100 amps or at 13 kW on a 60-amp circuit. You should have it installed by a qualified electrician.
Yes, it’s electric with no open flame and no carbon monoxide risk. The ETL certification and thermal protection add extra safety.
Yes, it has a built-in thermostatic control with two-stage operation for more efficient temperature management.
No, it requires a hardwired 240V connection. It’s not plug-in at typical 120V outlets.
Warms my garage quick.
It heats my 2-car garage to 70 degrees in about 15 minutes. The thermostat is accurate. The fan is a bit loud but that's expected.
I've used this heater for two winters in my workshop. It blows a massive amount of air and warms the space quickly. The digital thermostat keeps the temperature steady. There's no fumes, so I don't have to worry about ventilation in my enclosed shop. The 20kW setting is overkill for most days, so I switch to 13kW. The unit is well built but heavy, so I mounted it to the wall. The fan is a bit noisy, but it's a forced air heater, so that's normal. I'm very satisfied.
I bought this for my small woodworking shop. It heats up the space quickly. The thermostat is easy to set. No fumes and no oil to mess with. Would recommend.
It puts out excellent heat and the controls are simple. The only downside is the weight; it's not easy to move around. I put it on wheels anyway. Overall, happy with the purchase.
The heater stopped turning on after about 30 days of use. The thermal overload switch seems to be faulty. I got a warranty replacement, but it was a hassle. Now it works again.
I've used many heaters over the years, including propane and oil-filled. This electric one is the best for my needs. It's clean, quiet, and doesn't smell. The 20kW setting brings my 30x40 shop to its target temperature quickly. The thermostat holds it there without cycling too often. I also like the safety cut-off when it overheats. The only issue is that it's 220V, which I had to have wired, but I already had the panel setup.
This thing is a beast. It heats my uninsulated garage in a few minutes. The digital display is nice. It's loud but I don't mind.
I use it in my shop when it's freezing. It works well, but the 20kW setting trips my 30-amp breaker. I have to use the 13kW setting, which is still plenty. Just be aware of your electrical setup.
I've had mine for a year now. It has never failed to start. The airflow is strong and the heat is consistent. I use it in my detached garage every winter. It's worth every penny.
This thing puts out serious heat. The fan is loud but yeah it works.
This heater is made for a big space. I use it in my two-bay garage. The thermostat is spot on. The 13kW setting is enough for most days. The 20kW setting is for initial warm-up. No complaints at all.
Orders over $45.00 ship free. Otherwise, shipping is $8.00.
Hassle-free returns
SSL encrypted checkout
100% genuine products
Power tools for every job – shop DeWalt and Ridgid with clear specs and free shipping over $45.
Phone: +1 (216) 555-0174
Email: support@workbenchworld.us
Address: 4820 Industrial Parkway, Cleveland, OH 44135, United States