$20.00
We will hold your cart for 15:00.
The RIDGID 37113 adds 6 feet of flexible reach to RIDGID micro inspection cameras, bringing hard-to-see areas into clear view.
Categories : Tools & Hardware
SKU : WOR-TOO-1000
The RIDGID 37113 Micro Extension Cable is a must-have for RIDGID micro inspection cameras. It extends your working reach by 6 feet, letting you see inside walls, pipes, and other tight spots without moving the main display. The fully flexible cable navigates bends and angles with ease, giving you clear images in dark, hard-to-reach areas.
Simply connect the cable between the camera head and the handheld display. It locks securely to provide a stable connection for both video and power. With optional extensions, you can build a total reach of up to 30 feet.
If you have a different RIDGID camera, check the product's connector type; most micro-series and SeeSnake systems use the same interface. The 37113 does not fit the CA-150 or older analog models.
In tight crawlspaces or when inspecting plumbing lines, a 6-foot extension means less repositioning of the display. It’s also handy when you need to route the camera through a longer run without disconnecting the head.
Adds 6 ft of flexible cable to compatible RIDGID micro cameras
Works with micro CA-100, CA-300, microEXPLORER, and SeeSnake micro
Connects quickly between camera head and handheld display
Optional extensions let you reach up to 30 ft total
RIDGID lifetime warranty for peace of mind
Model: 37113
Length: 6 ft
Weight: 0.5 lb
Product Type: Inspection Camera Extension Cable
Compatibility: micro CA-100, CA-300, microEXPLORER, SeeSnake micro
Connector Type: Proprietary locking
Seller: Workbench World
MPN: 37113
The 37113 is one of several extension cables RIDGID offers. You can combine multiple cables to tailor the reach to your job. The connectors are designed to be water-resistant, so you can use them in damp environments without worry.
This cable works exclusively with RIDGID micro/SeeSnake systems with the same locking connector. Check your camera model in the compatibility list before ordering. If you have a CA-150, this extension is not the right fit.
Align the arrow on the connector with the camera plug, then push and twist until it clicks. Avoid bending the cable at a sharp 90° angle directly at the connector; coil the cable loosely when storing to protect the internal wiring.
No, the 37113 is designed for micro CA-100, micro CA-300, microEXPLORER, and SeeSnake micro systems. It is not compatible with the CA-150.
Yes, you can link optional extensions to reach up to 30 feet, depending on the camera model.
Align the connector between the camera head cable and the handheld display unit, then screw or snap it into place.
No, the cable is engineered to transmit power and video signal without noticeable quality loss.
Yes, the fully flexible cable is designed to navigate tight spaces without cracking or kinking.
Great extension for tight spots.
This cable reaches where I couldn’t see. It saved me from cutting drywall.
I use my inspection camera for all sorts of plumbing and electrical work. This six-foot extension makes it so much easier to get around corners. The connection is secure and there’s no signal loss. It’s a little stiff when cold, but that’s fine. The case is small and easy to store. Definitely worth it.
I bought this for my husband’s inspect camera. He says it works perfectly.
It’s a bit pricey for a cable, but it’s made well.
This extension got me out of a jam. I could see exactly where the blockage was.
It works, but the cable doesn’t like cold weather. It gets stiff and hard to bend.
I’m a maintenance tech and this is always in my bag. Very handy.
Orders over $45.00 ship free. Otherwise, shipping is $8.00.
Hassle-free returns
SSL encrypted checkout
100% genuine products
Power tools for every job – shop DeWalt and Ridgid with clear specs and free shipping over $45.
Phone: +1 (216) 555-0174
Email: support@workbenchworld.us
Address: 4820 Industrial Parkway, Cleveland, OH 44135, United States