$20.00
We will hold your cart for 15:00.
The DEWALT DWV012 10-gallon HEPA wet/dry vacuum and dust extractor combines a 15-amp motor, 155 CFM airflow, and automatic filter cleaning to handle construction dust and wet spills with minimal downtime.
Pair withDEWALT DWV015 10 Gal HEPA Dust Extractor, Auto Clean$99.81
Categories : tools
SKU : WOR-TOO-700
The DEWALT DWV012 10-Gallon HEPA Wet/Dry Vacuum / Dust Extractor is a jobsite cleanup machine engineered for contractors and remodelers who need continuous suction even when dust is heavy. Its automatic filter clean pulses every 30 seconds, so you don't have to stop to clear the filter. The 15-amp motor delivers 155 CFM of airflow, and the included DWV9330 HEPA filter meets the EPA RRP rule for lead-safe renovation work when used correctly.
The auto filter clean system sends a pulse of air through the filter every 30 seconds, dislodging dust and restoring airflow. That means less downtime and consistent suction during drywall sanding, concrete grinding, and other dusty work. You can also switch to variable suction to reduce power consumption when full performance isn't needed.
While the auto-clean cycle reduces filter clogging, you should still inspect the HEPA filter regularly. If suction drops, turn off the unit, open the latch, remove the filter, and gently tap or brush away dust. Do not wash the HEPA filter unless the manual recommends it. For wet pickup, remove the filter and follow the wet-mode instructions in the manual. If the auto-clean cycle doesn't seem to pulse, check that the filter is seated, the tank lid is closed, and the hose is not blocked.
Automatic filter clean pulses every 30 seconds to keep suction strong without stopping
10-gallon capacity suits jobsite cleanup and renovation dust
HEPA-rated filtration meets EPA RRP rules when used with DWV9330 filter (included)
Power Tool Actuation starts and stops the vacuum with a connected tool
Variable suction dial matches power to the application
Model: DWV012
Motor: 15 Amp
Airflow: 155 CFM
Capacity: 10 gallons
Filter Type: HEPA
Product Type: Wet/Dry Vacuum / Dust Extractor
Variable Suction: Yes
Power Tool Actuation: Yes
Automatic Filter Clean: Yes – pulse every 30 seconds
Seller: Workbench World
MPN: DWV012
Regular maintenance keeps your dust extractor at peak performance. The auto filter clean handles most dust, but a quick manual check every few jobs prevents surprise downtime.
The auto pulse keeps the filter from clogging during continuous use, but it isn't a replacement for periodic cleaning. When the filter is heavily loaded, a manual tap or replacement restores airflow. The DWV9330 HEPA filter is specifically designed for RRP-compliant work.
The auto filter clean pulses every 30 seconds during operation. Manually inspect the filter when suction drops or after heavy dust use.
First, check that the vacuum is plugged in and the tank lid is sealed. Make sure the filter is seated correctly and the hose has no blockage. If the motor runs but the pulse doesn't occur, contact support.
Yes, it is a wet/dry vacuum. For wet pickup, remove the HEPA filter and follow the wet-mode instructions in the manual.
The unit meets the EPA RRP rule for HEPA vacuum only when the DWV9330 filter (included) is used in accordance with the manual.








Sucks great.
It picks up fine dust. The filter cleaning works. It's a bit loud.
I've been a contractor for over 30 years, and I wish I had this extractor decades ago. It pulls dust right at the source, so my crew and I aren't breathing it in. The automatic filter cleaning means I never have to stop and tap the filter. It works well on wet spills too—I used it to pick up a flooded water heater pan. The 15-amp motor has plenty of pull. The 10-gallon tank is a good size for a job site. It's not cheap, but my lungs are worth it. I'm buying a second one for my other workshop.
This thing is awesome. It handled all the drywall dust from my remodel. The HEPA filter makes me feel safer. Auto filter clean is neat.
It's heavy to move around. The hose is decent. Suction is strong. Works well with my sander.
I use it with my power tools and the air stays clean. The automatic filter cleaning is a game changer. It's expensive but worth it for health.
I connected it to my table saw and planer. It keeps my shop dust free. The 10-gallon capacity is plenty. Emptying the bags is easy.
The vacuum works great, but you need to buy the hose kit separately. That's annoying. Otherwise, it's a solid machine.
Orders over $45.00 ship free. Otherwise, shipping is $8.00.
Hassle-free returns
SSL encrypted checkout
100% genuine products
Power tools for every job – shop DeWalt and Ridgid with clear specs and free shipping over $45.
Phone: +1 (216) 555-0174
Email: support@workbenchworld.us
Address: 4820 Industrial Parkway, Cleveland, OH 44135, United States