$20.00
1
Your cart is empty
Subtotal
We will hold your cart for 15:00.
Buy more, save more
Coupon discount
Shipping
Add 2 more items to unlock your free mystery gift.
Complimentary item.
Total
$20.00
We will hold your cart for 15:00.
DEWALT DW9153 6-1/2-inch 90-tooth tungsten carbide circular saw blade with thin kerf and anti-stick coating is designed for smooth, chip-free cuts in vinyl siding and trim.
Pair withDEWALT DW919 18-Volt Flexible Floodlight – Xenon Work Light$15.00
Categories : tools
SKU : WOR-TOO-127
Share This:
The DEWALT DW9153 6-1/2-Inch 90-Tooth Vinyl Cutting Circular Saw Blade is the clean-cut specialist in the DW9153 family. It combines a high tooth count with a thin kerf and a specially formulated anti-stick coating, so you get a smooth edge without burned edges or gummed-up teeth.
When you’re cutting vinyl siding, PVC trim, or aluminum soffit, a standard framing blade can chip and melt the material. The DW9153’s 90 tungsten carbide teeth shear through the material, leaving a crisp edge that needs less cleanup. The thin kerf removes less material, which means faster cutting and less load on your saw. Ribbed heat vents help the blade run cooler, reducing flexing and binding even on long cuts.
This blade is engineered for vinyl siding and vinyl trim, but it also handles other non-ferrous materials like aluminum and plastic composites. Use it on a 6-1/2-inch circular saw for siding work, gutter installation, or fascia and trim projects. The anti-stick coating is the secret weapon—vinyl and plastics tend to melt and stick to standard blades, but the low-friction coating keeps the blade moving smoothly and prevents gum-up.
The blade uses a 5/8-inch arbor with a diamond knockout, which fits the vast majority of circular saws in the US. The 90-tooth tip is made from tougher tungsten carbide that stays sharp longer than standard steel blades. When you need to replace a worn blade, the DW9153 is a direct drop-in for most cordless and corded 6-1/2-inch saws.
For carpenters, siding installers, and DIYers who work with vinyl, the DEWALT DW9153 gives you a clean cut the first time—without melting, chipping, or binding.
90 tungsten carbide teeth produce a smooth, chip-free edge on vinyl siding and trim
Thin kerf cuts faster and with less resistance, reducing binding
Anti-stick coating prevents vinyl and plastic gum-up for longer blade life
Ribbed heat vents keep the blade cooler and reduce flexing
5/8-inch arbor with diamond knockout fits standard 6-1/2-inch circular saws
Kerf: Thin kerf
Arbor: 5/8 in with diamond knockout
Model: DW9153
Teeth: 90
Coating: Anti-stick
Diameter: 6-1/2 in
Material: Tungsten carbide tips
Application: Vinyl, aluminum, plastic composites
Product Type: 6-1/2-Inch Circular Saw Blade
Seller: Workbench World
MPN: DW9153
Vinyl and other non-ferrous materials melt easily at high speeds. A blade with fewer teeth tends to rip large chunks and generates more heat. The DW9153's 90 teeth create a shearing effect that reduces heat and produces a clean edge, essential for siding that needs to look good at the seams.
Using the wrong blade not only jeopardizes the finish—it also shortens blade life. A thin-kerb vinyl blade cuts with less force, which is important on cordless saws and thin-gauge siding. The anti-stick coating speaks to the biggest complaint of plastic cutting: resin building up on the teeth and causing drag. This blade solves that problem before it starts.
Beyond vertical siding, this blade works nicely on vinyl soffit panels, aluminum coil stock, and PVC trim board. Keep a DW9153 in your siding bag and your general-purpose wood blade on the saw for framing. Switching the blade takes seconds and ensures you get the right finish every time.
It is specifically designed for vinyl siding, vinyl trim, aluminum, and soft plastic building materials. The 90-tooth configuration gives you a clean, chip-free cut in these materials.
It's not a general-purpose wood blade. The geometry is optimized for non-ferrous materials, so using it on wood may not produce the same performance and will drive the cost per cut up. Use a DEWALT wood blade for lumber and plywood.
It has a 5/8-inch arbor, which is standard on most 6-1/2-inch circular saws. Check your saw's arbor size before purchase.
The anti-stick coating minimizes gum-up. Reduce feed pressure and let the blade cut at its own pace. Avoid forcing the saw through the material.
The diamond knockout allows you to adjust the arbor size to fit saws with smaller arbors. If your saw uses a 5/8-inch arbor, you can leave it intact.
Cuts clean.
I used this for vinyl siding. It cuts smoothly with no chipping. Great blade.
This blade is perfect for vinyl. I've made hundreds of cuts and it still looks new. The anti-stick coating really prevents build-up. The thin kerf means less waste but also a bit more flex, so I have to be careful. It's a high-quality blade, worth the price.
Works well.
Good blade for the money. It cuts vinyl siding and trim without melting. The teeth are sharp.
I do vinyl siding installation full-time. This blade is a must-have. It gives a clean cut every time, no chipping or melting. The 90 teeth leave a smooth edge. It holds up well to continuous use. I've been using it for a month and it's still sharp. I'll definitely replace it with the same one.
Good blade, but it's a bit expensive. However, it does the job perfectly.
Great for vinyl.
