$20.00
We will hold your cart for 15:00.
DEWALT DW083K self-leveling 3-beam red line laser provides fast 1/4-inch accuracy at 100 ft, with a magnetic pivoting bracket for layout, track, and framing work.
Categories : tools
SKU : WOR-TOO-444
The DEWALT DW083K 3-Beam Self-Leveling Line Laser is a versatile layout tool for carpenters and general contractors who need precise lines on the job. It projects three red laser beams with an accuracy of 1/4 inch at 100 feet, giving you consistent reference lines for bottom plates, top tracks, stud layout, and trim work. The self-leveling pendulum stays accurate over a wide range, and the built-in magnetic pivoting bracket lets you mount it quickly on metal studs, door frames, or any metal surface.
The single-lever power switch locks the pendulum in the off position, so the laser stays protected when you toss it in a case or carry it to another room. The over-molded housing helps maintain calibration under bumpy jobsite conditions, and with an IP54 rating, it holds up against dust and water splashes. The focused beam keeps the dot size small over longer distances, which means less guessing on walls and floors.
Set the laser on a stable surface or attach it to a metal beam using the magnetic pivoting bracket, turn the lever to unlock the pendulum, and let it self-level. The DW083K is factory calibrated, but if it's dropped or knocked out of level, the best practice is to have it checked by a qualified service center. The integrated track clearance helps you set up for bottom and top track installation quickly, without needing a second person to hold a level.
For framing crews, finish carpenters, and DIYers who want dependable layout lines, the DW083K with its included carrying case is a smart investment.
Self-leveling 3-beam red laser with accuracy of 1/4 inch at 100 ft for consistent layout.
Magnetic pivoting bracket mounts quickly on metal surfaces for hands-free setup.
Single-lever power switch locks the pendulum during transport and storage.
IP54-rated over-molded housing resists dust and water for jobsite durability.
Focused laser beam keeps dot size small at distance, improving long-wall accuracy.
Model: DW083K
Housing: Over-molded
Accuracy: 1/4 inch at 100 ft
Beam Color: Red
Beam Count: 3
Product Type: Line Laser
Leveling Type: Self-leveling pendulum
Mounting Bracket: Magnetic pivoting bracket
Protection Rating: IP54
Included Accessories: Carrying case
Seller: Workbench World
MPN: DW083K
The DW083K projects three lines from one setup: one for the bottom track, one for the top track, and a cross-line for reference. That means you're not moving the laser around to transfer points, which saves time on framing, partition walls, and repetitive layout tasks.
Self-leveling lasers are only useful if the pendulum stays free and the housing absorbs bumps. The DW083K locks the pendulum when off, and the over-molded housing protects the mechanism from rough handling. The result is a laser that gets back to level quickly when you set it on an uneven surface.
The magnetic pivoting bracket is one of the most useful parts of this laser. Attach it to a steel stud, a track, a beam, or even a metal shelf bracket. The pivot lets you angle the laser toward the work area without shimming it with tape or blocks. For contractors who need speed, this is the setup advantage that matters.
Place the laser on a stable surface or attach it to a metal surface using the magnetic pivoting bracket. Move the single-lever switch to the on position to unlock the pendulum and let the laser self-level. Adjust the bracket to aim the beams as needed.
The DW083K is factory calibrated and does not have a user calibration feature. If it seems out of level after a drop or hard use, have it checked by a qualified service center or contact DEWALT support for calibration service.
The red beams are most visible indoors or in shaded areas. Direct sunlight can wash out the beam, so for outdoor work in bright light you may need a laser detector or a higher-visibility green laser.
The built-in magnetic pivoting bracket is designed for metal surfaces like steel studs, track, frames, and columns. The bracket rotates to help you position the laser at the right angle.
Yes, the included carrying case is molded for the DW083K and keeps the laser, bracket, and manual organized and protected.
Lines are crisp and level.
The self-leveling works well. The magnetic bracket is handy.
I've used this on hundreds of layouts. The beams are bright and visible even in moderately lit rooms. It self-levels quickly and stays accurate. The pivot bracket lets me set it at any angle. It's survived drops and dust. This is one of the better lasers I've owned.
Does what it says. The lines are clear. I just wish the beams were green instead of red.
I'm a formsetter, and this laser speeds up my layout. It levels itself in seconds. The magnetic mount is strong. I can set it on a stud without a tripod. Definitely a solid purchase.
Made hanging shelves a breeze.
Orders over $45.00 ship free. Otherwise, shipping is $8.00.
Hassle-free returns
SSL encrypted checkout
100% genuine products
Power tools for every job – shop DeWalt and Ridgid with clear specs and free shipping over $45.
Phone: +1 (216) 555-0174
Email: support@workbenchworld.us
Address: 4820 Industrial Parkway, Cleveland, OH 44135, United States